Sale!
11 Piece Two-Way Hydraulic Gear Puller Set Steel
  • Material: S45C steel
  • Delivered in a plastic box
  • Delivery includes:
  • 1 x Hydraulic ram (37.7 mm/1.5″ outer diameter x 168 mm/6.6″ L, 16 teeth)
  • 1 x Adapter
  • 1 x Ram extension rod (24.5 mm/1″ outer diameter x 280 mm/11″ L)
  • 1 x Forcing screw
  • 1 x Striking handle (203 mm/8″ L)
  • 1 x Hub socket (37.7 mm/1.5″ outer diameter x 180 mm/7″ L)
  • 5 x Hub puller leg
not rated $174.42 $113.37 Add to cart
Sale!
19 pcs Bushing and Bearing Seal Drivers Tool Set
  • Kit size: 19″ x 15″ x 4″ (L x W x H)
  • Tool material: Carbon steel
  • Drift sleeve diameters: 0.98″, 1.57″, 2.36″
  • Drift sleeve length: 8.66″
  • Nylon drift diameter:
  • 1″, 1.1″, 1.2″, 1.25″(x2), 1.25″(x3), 1.45″, 1.57″, 1.65″ (x2), 1.85″ (x3), 2″ (x2), 2.16″, 2.36″, 2.44″ (x3), 2.68″, 2.83″ (x2), 2.95″, 3.14″ (x2), 3.22″, 3.34″, 3.54″ (x2), 3.93″, 4.33″
  • Innovative, lightweight design for installation of bearings without damaging bearing or housing
  • Contains 3 metal bearing drift sleeves and 34 nylon drifts
  • Can also be used to install oil seals
  • Fits most sizes of bearings and seals found on modern vehicles
  • Delivered in a blow-molded carry case for easy transport and storage
  • Universal kit including a wide size range of seal installers
not rated $134.42 $87.37 Add to cart
Sale!
Rear Bushing Tool Set for Ford Focus MK1 1998-2004
  • Kit size: 15″ x 11.4″ x 4.3″ (L x W x H)
  • Tool material: Carbon steel
  • Remove/install rear subframe bushings
  • Can be used without removing the subframe
  • Durable construction
  • Delivered in a blow-molded case for easy transport and storage
  • Suitable for:
  • Ford Focus MK1 1998-2004
not rated $132.33 $86.01 Add to cart
Sale!
Silent Block Mounting Tool for Fiat Rear Axle
  • Kit size: 10.6″ x 8.5″ x 2.4″ (L x W x H)
  • Durable construction
  • For the mounting of silent blocks on Fiat rear axle
  • Supplied in a blow molded carry case for easy transport and storage
  • Suitable for Fiat Stilo ’01 – ’07, Fiat Bravo from ’07, Lancia Delta ’08
not rated $47.44 $30.84 Add to cart
Sale!
Silent Block Tool for Skoda VW Seat
  • Kit size: 8.5″ x 4.7″ x 2″ (L x W x H)
  • For quick installation of rubber bushings on front axle
  • Durable construction
  • Supplied in a blow molded carry case for easy transport and storage
  • Suitable for Audi A2, VW Polo IV 9N (02-05), Skoda Fabia I, Seat Ibiza 6L (02-06), Cordoba from 2002
  • Can be used as OEM 3062, 3253/8, T10037
not rated $41.17 $26.76 Add to cart
Sale!
Front Upper Ball Joint Extractor & Install Tool Set for VW T4
  • Material of the tool set: Heavy-duty carbon steel
  • Weight: 10.1 lb
  • Suitable for VW T4 and also available for other vehicle types
  • Supplied in a red plastic storage case: 14.8″ x 11″ x 4.3″ (L x W x T)
  • Delivery includes:
  • 1 x Hardened spindle with 0.94″ hexagon drive
  • 2 x Different joint tool, both with locks
  • 3 x Plunger in different sizes
not rated $142.46 $92.60 Add to cart
Sale!
Hydraulic Wheel Hub Puller with Hammer Set 10 Ton
  • Included 3 pullers/ hammers: hydraulic spindle, screw, impact hammer
  • Used to press the axle shaft from the hub
  • For four or five bolt hubs with the centerline of the bolts mounted in a 4.57″-5.31″ diameter circle
  • Hydraulic spindle with 10 ton capacity
  • Suitable for VW, Audi, Seat, Skoda, Opel, Volvo, Fiat, Renault, Peugeot, Citroen, etc
  • Highest quality design for long life in daily workshop use
  • Displayed in a blow molded case
not rated $198.76 $129.19 Add to cart
Sale!
Wheel Hub Puller Set 30 pcs
  • Can remove wheel hubs, half shafts, brake drums, drive shafts directly in the car
  • Heavy duty set for the removal of stubborn four and five stud hubs and brake drums on cars and light commercial vehicles
  • Suitable for VW, Audi, Alfa Romeo, Ford, Citroen, BMW, Mazda, FIAT, Mercedes-Benz, Seat, Opel, Peugeot, Renault, Skoda, Porsche…etc
  • A mechanical spindle can press out drive shaft
  • Spindle pressure: Maximum 12 t
  • With a 9.5 lb slide hammer
  • Highest quality design for long life in industrial use
  • Specification of 30 pcs:
    • 4 x screw L6.1″ -2 circle
    • 4 x screw L6.1″ -4 circle
    • 4 x screw L6.6″ -2 circle
    • 4 x screw L6.6″ -4 circle
    • 4 x screw L6.6″ -4 circle
    • 4 x nuts Φ1.1″
    • 1 x lever for pneumatic wrench L10.2″
    • 1 x lever for slide hammer L22.6″
    • 1 x top block of lever for slide hammer
    • 1 x hammer
    • 1 x bearing-8 holes
    • 1 x connecting block
  • Supplied in a blow molded case
  • Highest quality design for long life in industrial use

not rated $212.95 $138.42 Add to cart
Sale!
Silent Bearing Puller Kit for BMW
  • Silent bearing tool set for BMW, 16 pcs
  • Allows the renewing of rubber bushings the suspension
  • Includes various print pieces, stem and pods
  • Suitable for vehicles from BMW, 1 Series models, for example, E81, E87; 3 Series E36, E46, E83, E90, E91, E92, E93; 5 Series models E60, E61, E63; 6 Series models , E64, E38; 7 Series models, E65, E66, E67; 8 Series models E31, E85 Z4 models, E86, and Mini Cooper S R53 model
  • A 8.9″ feed rod for actuating the Silent bearing inserts with thread M12 x 0.06″ long, at the end of the spindle with thread M12 x 0.06″ short, with hex drive wrench size 0.31″
  • Motion thread on the spindle and axial groove bearing on the pressure piece cause high train and pressure performance with minimum effort (torque)
  • A spindle nut with thread M12 x 0.06″, with hexagonal drive wrench size 0.75″
  • A compression nut with axial groove bearing, internal thread M12 x 0.06″, with hexagonal drive wrench size 0.94″
  • Training and retraction pressure plots for extracting and inserting the ball joint on wheel carrier rear
  • A support sleeve outer diameter 2.76″, inner diameter 2.26″, side slits
  • A support plate, with hole diameter 0.49″, outer diameter 2.76″, trimmed with outer diameter 2.24″, height 1.48″
  • A pull-out pressure sleeve, with internal thread M12 x 0.06″, outer diameter 2″, inner diameter 1.96″, height 1.4″
  • An intake pressure sleeve, with internal thread M12 x 0.06″, outer diameter 2.28″, inner diameter 1.85″, height 1.7″
  • Training and retraction apparatus for extracting and inserting the ball joint and the rubber mount in the trailing arm
  • A pull-out spacer sleeve with a bore diameter of 0.49″, outer diameter 2.17″, inner diameter 1.81″, height 2.85″
  • A pull sleeve , with hole diameter 0.49″, outer diameter 1.77″, inner diameter 1.42″, height 1.19″
  • An intake spacer sleeve, with internal thread M12 x 0.06″, outer diameter 2.17″, inner diameter 1.83″, height 1.19″, with lateral phase
  • Training and retraction pressure plots for extracting and inserting the rubber mount in the rear axle down, rear gear screw
  • A spacer sleeve , with hole diameter 0.49″, outer diameter 2.28″, inner diameter 1.85″, height 2.38″
  • A pressure element, with internal thread M12 x 0.06″, outer diameter 1.96″, inner diameter 1.26″, height 1″
  • Training and retraction pressure plots for extracting and inserting the rubber mounts in the rear transmission mount, front and rear
  • A sleeve with a bore diameter of 0.49″, outer diameter 2.56″, inner diameter 1.98″, height 2.76″
  • A pull-out pressure piece, with internal thread M12 x 0.06″, outer diameter 1.89″, inner diameter 1.26″, height 0.79″
  • An intake pressure piece , with internal thread M12 x 0.06″, outer diameter 2.56″, inner diameter 1.26″, height 0.8″
  • A draw- plate , with hole diameter 0.49″, outer diameter 1.98″, trimmed with outer diameter 1.81″, height 0.48″
  • Supplied in blow molded case
  • Tool in the highest-quality execution
  • Long life in daily workshop use
not rated $137.66 $89.48 Add to cart